# EIO-LCA Web Forum

A support and discussion resource for users of the website
 It is currently Thu May 19, 2022 2:07 pm

 All times are UTC - 5 hours

 Page 1 of 1 [ 2 posts ]
 Print view Previous topic | Next topic
Author Message
 Post subject: problems with energy intensity of energy itselfPosted: Mon Jan 23, 2006 3:34 pm

Joined: Mon Jan 23, 2006 3:17 pm
Posts: 1
NUMERAIRE BLUES.

Robert Herendeen
Illinois Natural History Survey
217/244-2137
herendee@uiuc.edu
7 November 2005

You buy a gallon of gasoline for \$2.00. Let’s say the producer’s price is \$1.25/gal. The energy intensity for “refined petroleum products” from EIOLCA is 25,800 Btu/\$, so the total direct and indirect energy impact is 25,800*1.25 = 32,250 Btu. Accounting for the energy impact of the \$0.75/gal transportation and trade margins will only add ca 10,000 Btu, for a total of ca 40,000-50,000 Btu/gal. But you know that the heat content of gasoline is ca.125,000Btu /gal., so there is a major mismatch here. What is going on?

In general, possible contributing factors are:
1. Aggregation
2. Rapid price change
3. Converting from producers’ to purchasers’ prices
4. Difficulties from using dollar flows as surrogates for energy flows, an example of the general “numeraire problem”.

These factors are not totally independent. In particular, 1 and 4 interact, and if enough disaggregation is done, 4 may cease to be a problem.

Here is a possible scenario of how factor 4 could cause trouble. Gasoline is just one product under the aggregated category “refined petroleum products.” If gasoline were much more expensive (measured in \$/Btu) than the average refinery product, then its apparent energy intensity would be less than the average for all refined petroleum products. In actuality, gasoline is more expensive than the average, so this is a potential explanation.

As I have described the problem here, I have assumed that the energy out of the ground is “counted” in the EIOLCA intensities; the problem is just allocation. However, in EIOLCA I am not sure that the energy out of the ground has been included anywhere!

Below I describe how I have adjusted things to patch up this problem; I address the question of whether energy out of the ground has been accounted for properly anywhere in EIOLCA. Before that, however, I point out that this problem was addressed directly in 1975 (Bullard, C. W., and R. Herendeen. 1975. Energy costs of goods and services. Energy Policy 3:263﷓278.) A mixed approach was used, in which outputs of energy sectors are expressed in energy rather than dollars in the direct requirements matrix. Then the mixed matrix is inverted. The energy intensities of energy commodities then are measured in Btu/Btu. Compared with EIOLCA, this approach requires:
1. Additional data on energy flows between energy sectors.
2. That one invert the matrix oneself, rather than merely using the existing inverse from BEA.

A POSSIBLE WAY TO APPROACH FACTOR 4 WITHOUT USING THE MIXED APPROACH.

If the EIOLCA energy intensities do not include the energy from the ground, then the total energy intensity (Btu/\$producer) would be
eeiolca +1/pproducer ,

where pproducer is the producer’s price in \$/Btu. This would mean the physical energy intensity (= ephysical, measured in Btu/Btu) is

eeiolca*epoducer + 1.

This is always >=1, which removes the concern above.

I have applied thinking like this to coal, refined petroleum, electricity , and natural gas, but it did not seem to give reasonable results in all cases. Electricity has the problem associated with the thermal efficiency of thermal power plants, and coal and refined petroleum also have the problem of converting from producers’ to purchasers’ prices.

EIOLCA is not explicit about how these issues are handled, and I am reluctant t second-guess them; I think I have said enough here about the problem(s) to indicate a call for more clarity. If researchers want to discuss details, they should feel free to contact me.

_________________
ROBERT HERENDEEN
iLLINOIS NATURAL HISTORY SURVEY
CHAMPAIGN, IL 61820
217/352-8938

Top

 Post subject: Posted: Tue Feb 28, 2006 9:53 pm

Joined: Sat Aug 27, 2005 1:01 pm
Posts: 90
(editors note: I have corresponded with Bob Herendeen several times in the past and replied to him personally right after he posted this - I just realized that I never actually posted my reply on here, so I have edited the thread with the answer in case anyone else ever has this question. I have added a few further clarifications too.).

--

Bob

I think the easy reply to your post is that the energy "out of the ground" - innate to the crude oil used to make the gasoline - is
not counted in our calculations (we would have no
way to do this across all possible feedstock uses of energy in the
economy, such as solar radiation, etc, with the data sources we have).

EIO-LCA only talks about the energy used in manufacturing across the supply chain. The 125,000 BTU/gallon for gasoline is its energy content, which mostly comes from crude oil. However EIO-LCA does count any of the energy used at the refinery, etc. Note this is referred to as "fuels used as energy" rather than "fuels used as feedstock" in most DOE reports.

Note on the other hand if you are looking at the production of some
other product (e.g. airplanes) and go to the "energy" data, then of
course the use of gasoline used as energy [125,000 BTU
per gallon] would be counted.

Anyway, the bottom line is that it is not a contradiction but instead an assumption used when we create the data.

For those of you who want to include such feedstock uses of energy, feel free to use our IO economic results to then feed into your own energy data. One note of caution though - you should aim to be consistent about including ALL such uses, such as solar radiation, geologic forces to create fossil fuels, etc., and not just arbitrarily choose to do it for some fossil fuels but not other, etc.

On the other hand, it is quite easy to add on the "energy out of the ground" to any estimates in EIO-LCA by using the conversions like Bob has pointed out (e.g., 125,000 BTU/gallon for gasoline).

hope this explains things.

-scott

Top

 Display posts from previous: All posts1 day7 days2 weeks1 month3 months6 months1 year Sort by AuthorPost timeSubject AscendingDescending
 Page 1 of 1 [ 2 posts ]

 All times are UTC - 5 hours

#### Who is online

Users browsing this forum: No registered users and 1 guest

 You cannot post new topics in this forumYou cannot reply to topics in this forumYou cannot edit your posts in this forumYou cannot delete your posts in this forumYou cannot post attachments in this forum

Search for:
 Jump to:  Select a forum ------------------ News and Announcements    Latest News    Data Updates    Bug Fixes Questions and Answers    Ask the Experts    eiolca.net questions    Comment Box    About Teaching LCA Courses Research    Work in Progress    References